MYT CR8TiV

A Place to Enhance and Inspire to be CR8TiV !

Glue Gun .vs. E-6000 Glue

on October 30, 2013

Untitled

Hello … today I’m going to do a Side by Side review of the Glue Gun versus the E6000 Glue. I have done side by side product reviews before like my post on the Translucent Liquid Sculpey versus the Sculpey Bake and Bond. It wasn’t exactly a review but more of a caution to not buy the wrong product like I did. I bought the Sculpey Bake and Bond bcuz it was a few dollars cheaper than the TLS “Translucent Liquid Sculpey” and later found out they’re totally different products. I don’t wanna ramble on about the differences between the two you can just look for that blog post if you wanna know more about it.

But this topic is about comparing the Glue Gun and the E6000 Glue. Many crafters use the E6000 glue as a strong permanent adhesive for things like gluing a clay bead or charm to a bezel or gluing down a resin charm somewhere. I usually just use a Glue gun and found it to adhere pretty well and strong. I’m currently working on a commissioned art project and I was gluing down polymer clay sculptures onto a wood base. Most of them that I had glued down with my glue gun stuck pretty permanently but one had come undone and my husband suggest I use a stronger glue for this. Since alot of crafters use the E6000 glue I thought I’d give it a try.

So below is my list of PROs .vs. CONs for both glues. I’m gonna start with the E6000 glue. This is purely a matter of opinion as some might like the E6000 glue over the Glue Gun and some might agree with my opinion of the E6000 glue. So please do not comment or email me defending that E6000 glue is the greatest or whatever.

E6000 Glue :

PROs : It’s Industrial Strength – Permanent Bond – Can be applied for many uses – Dries Clear

CONs : Very strong odor – Fumes are Hazardous to your health if inhaled – Strong Health Risk Warning label such as possibly can cause Kidney damage, nausea, vomiting, instability, etc. – says it takes 2 minutes to adhere but recommends 24+ hrs to fully cure – very messy and the E6000 glue tends to ooze outta the tube on it’s own – if you don’t clean the nozzle the cap becomes permanently glued on

Glue Gun :

PROs : No hazardous fumes – Dries quickly – Also can be applied on many surfaces – Easy to use – Can buy different types of Glue Sticks like Glitter sticks, Fabric sticks, and Super Strength Glue sticks – Easy clean up – Reusable via purchasing more Glue Sticks

CONs : Leaves spider-web like strings – Must wait for glue to cool a little before touching with fingers – Chances of accidentally burning yourself – Glue may not stick to some surfaces – strength of adhesion varies depending on the craft it’s being used for.

I would have to say I’m more in favor of the Glue Gun mainly bcuz the Glue Gun sticks are generally non-toxic and does not give off hazardous fumes that are toxic to your health. Just inhaling the E6000 glue fumes seems to be a dangerous health risk that can damage your kidneys as the warning label on the tube states. I dunno about you but I don’t think I wanna be working with a product that has such a strong health risk warning label on it. I get nervous just working with Armature wire as it states it contains lead and can cause cancer and/or reproductive harm. My suggestion and rule of thumb is whenever crafting with materials like these … WEAR PROTECTIVE GLOVES !!

Overall I prefer to use my Glue Gun over the E6000 glue. I’ve never had any issues with the Glue Gun glue not properly adhering. The reason one of my clay items didn’t stick was probably bcuz I need to get a better Glue Gun. (-__-) The Glue Gun I have been using I bought from the 99¢ store so you can’t expect much from a $1 Glue gun. As the phrase goes … You get what you paid for. I plan to buy a *NEW* Dual-Temp Glue Gun when I get some extra money. If there’s a specific brand/model you’d suggest I buy please feel free to let me know.

Try to avoid using products that are labeled as hazardous to your health when crafting. I don’t think I want to use E6000 glue again and if I needed something to permanently adhere I’d probably just use Super Glue. It bonds faster than E6000 and even though Super Glue also has nasty smelling fumes it’s not as bad as the E6000 glue. With Super Glue fumes you at most lose a couple brain cells but nothing as hazardous as E6000. I hope this comparison is helpful and you think about using something else.

The hardware store often might have strong adhesives better than E6000 which can be used for crafting. Sometimes it’s okay to think outside the craft store and go to a hardware store for craft items. Maybe I’ll try that Gorilla glue for my crafts. I’ll post about that if I ever do try it out. Hope this all helps !! Happy Crafting and as always … B3 iNSPiR3D … B3 B0LD … B3 CR8TiV ~ MYT CR8TiV™

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: